PRODUCT INTRODUCTION
Á¦Ç°¼Ò°³
10ä³Î µ¥ÀÌÅͱâ·Ï°è GL240
±âº» 10ä³Î °íÁ¤Çü ÇÚµðŸÀÔ
Àü ä³Î isolated, ´Ù¾çÇÑ Input Áö¿ø
2GBÀÇ ´ë¿ë·® Flash Memory
4.3ÀÎÄ¡ÀÇ ³ÐÀº TFTÄ÷¯ LCD
USB memory stick Áö¿ø, USBÀÎÅÍÆäÀ̽º
Á¦Ç°¹®ÀÇ : 031-732-5990, sales@komets.co.kr
¿Â¶óÀΰßÀû¹®ÀÇ Ä«´Þ·Î±×º¸±â»ó¼¼¼³¸í
Item | Description | |||
---|---|---|---|---|
Number of analog input channels | 10 ch | |||
External input/output | Input *1 | Trigger or Sampling input 1 ch, Logic or Pulse input 4 ch | ||
Output *1 | Alarm output 4 ch | |||
Sampling interval | 10 ms to 1 h (in 10ms to 50ms, voltage only and limited channel), External | |||
Time scale | 1 sec to 24 hour /division | |||
Trigger function | Action | Start or stop capturing data by the trigger | ||
Source | Start: Off, Input signal, Alarm, External *1 , Clock, Week or Time | |||
Stop: Off, Input signal, Alarm, External *1 , Clock, Week or Time | ||||
Combination | OR or AND condition at the level of signal or edge of signal | |||
Condition | Analog: Rising, Falling, Window-in, Window-out | |||
Pulse: Rising, Falling, Window-in, Window-out | ||||
Logic: Rising or Falling | ||||
Alarm function | Detecting method | Level or edge of signal | ||
Condition | Analog: Rising, Falling, Window-in, Window-out | |||
Pulse: Rising, Falling, Window-in, Window-out | ||||
Logic: Rising, Falling | ||||
Alarm output *1 | 4 channels, Output type: Open collector (pull-up resistor 10 k¥Ø) | |||
Pulse input function *1 |
Accumulating count mode |
Accumulating the number of pulses from the start of measurement Range: 50, 500, 5 k, 50 k, 500 k, 5 M, 50 M, 500 M counts/F.S. | ||
Instant count mode |
Counting the number of pulses per sampling interval Range: 50, 500, 5 k, 50 k, 500 k, 5 M, 50 M, 500 M counts/F.S. | |||
Rotation count (RPM) mode |
Counting the number of pulses per second and then it is converted to RPM Range: 50 rpm, 500 rpm, 5 krpm, 50 krpm, 500 krpm, 5 Mrpm, 50 Mrpm, 500 Mrpm /F.S. | |||
Max. input pulse rate | 50 k pulses/sec or 50k counts per sampling interval, 16 bits counter is used | |||
Calculation function | Between channels | Addition, Subtraction, Multiplication and Division for analog input | ||
Statistical | Select two calculations from Average, Peak, Max., Min., RMS | |||
Search function | Search for analog signal levels, values of logic or pulse or alarm point in captured data | |||
Interface to PC | USB (Full speed) | |||
Storage device | Built-in Flash memory (2 giga-bytes), USB memory device *2 | |||
Data saving function | Captured data | Direct saving of data into built-in Flash memory or USB memory device | ||
Others | Setting conditions, Screen copy | |||
Ring capturing mode |
Function: ON/OFF, Number of capturing point: 1,000 to 2,000,000 (Size of the capture data will be limited to 1/3 of available memory) | |||
USB memory device emulation | USB Memory emulation mode (Transfer or delete the file in built-in memory) | |||
Engineering scale function | Set based on the reference point of the scaled output and input signal for each channel (Voltage measurement: four points are necessary to scale the output, Temperature measurement: two points are necessary to scale the output). | |||
Display | Size | 4.3 inch TFT color LCD (WQVGA: 480 x 272 dots) | ||
Formats | Waveform + Digital, Waveform only, Calculation + Digital, Expanded digital | |||
Operating environment |
0 to 45 ¡ÆC, 5 to 85 %RH (When operating with battery pack 0 to 40 ¡ÆC, charging battery 15 to 35 ¡ÆC) | |||
Power source | AC adapter (100 to 240 V, 50/60 Hz), DC power (8.5 to 24 V DC, max. 26.4 V) *3 , Battery pack *3 | |||
Power consumption | 29 VA or lower (when operating with AC adapter, displaying LCD) | |||
External dimensions (W¡¿D¡¿H) | approx. 194 x 117 x 42 mm | |||
Weight | approx. 520 g (Excluding AC adapter and battery pack) |